|
CVC-PARSEC THERMO-BRITE III CVC-PARSEC THERMO-BRITE is truly a master in a class of its own. Borne of technology derived from US space Program directed by NASA, the CVC-PARSEC Thermo-Brite radiant barrier has been manufactured for ubiquitous use in the institutional, commercial, residential, agricultural and industrial sectors. CVC-PARSEC Thermo Brite system advances eagerly towards the next level of distinction through continual development of its special range of products with a multitude of applications. CVC-PARSEC THERMO BRITE-III has many capabilities packed into a single material as this. This innovative heat insulation material with added durability and functionality represents the peak of CVC-PARSEC Thermo-Brite quest of superlative product development. The CVC-PARSEC Thermo-Brite III’s highly advanced composition makes it suitable for use in all weathers from the hot and humid tropics to cold and arid climates. In an age where there is a growing concern for escalating costs and environments uncertainties, CVC-PARSEC Thermo-Brite III is certainly redefining the frontiers for top-of-the line solar radiation barriers that are as efficient as they are economical. REDEFINING THERMO-BRITE III For overcoming critical problems associated with radiant heat and moisture transfer in roofs and walls of all buildings and structures, CVC-PARSEC Thermo-Brite III is the one product you can depend on. Bearing all the necessary elements for all your insulation and condensation control needs, it is tough, tear-resistant, non-corrosive multi-layered, pressure laminated, highly reflective surface with a protective coating. This combination of formidable features has enabled it to keep pace with the latest technological advancements and requirements of the building and construction industry. SALIENT FEATURES OF THERMO-BRITE III
-
The coated aluminum layer has been thickened to enhance its resistance to UV radiation exposure, while at the same time the non-organic and opaque nature of the strip is more able to prevent damage by UV radiation degradation over time. Durability of the coated film is also increased, and the greater barrier properties afford lower permeability to the passage of water vapour.
-
Extra polymers have been added into the structure that further counters the solar energy.
-
While the expanded metal content intensifies the toughness of CVC-PARSEC Thermo-Brite III, it also enable the installers to work easier because of its heavier and harder product feel. Thus, installers can more easily conform the material to the shape of the uneven surfaces.
-
The new coating procedure reliably coats all metallic surfaces uniformly so that the low emissivity properties of the surface are not harmed by atmospheric contaminates.
CVC-PARSEC THERMO BRITE – III Technical Properties Test Method Results
Reflectivity (Both sides) ASTM C1371-98 ±0.95 Emissivity (Both sides) ASTM C1371-98 ±0.05 Normal Thickness ±150 microns Tensile Strength ASTM 882.97 Machine Direction 6.280 kN/m Transverse Direction 4.806 kN/m Elongation at Break ASTM 882.97 Machine Direction 110% Transverse Direction 109% Tear Propagation Resistance ASTM D 1938-94 Machine Direction 30 N Transverse Direction 24 N Moisture Vapour ASTM E96-00 0.019 g/m²/day Transmission Rate Procedure A Surface Flame Spread BS 476 Part 7 Class 1 Fire Propagation Test BS 476 Part 6 Class 0 Salt Fog Test MIL Std 810 No Change (Method 507) Humidity Test MIL Std 810 No Change (Method 509) Roll Size 1.25m X 96m Normal Roll Weight ± 17 Kg Note: Technical data is based on average figures derived from laboratory testing, and are believed to be accurate.
|
